Designed for the space
Dimensions and layout are checked against the room and your priorities.
MMV Studio
Parquet and timber flooring in Málaga
We can assist you inEspañolEnglishDeutschРусский
Design, manufacture and installation of custom furniture
Parquet and timber flooring in Málaga. Substrate, moisture, level and fitting method are checked for the chosen flooring. Skirting and door clearances are coordinated with the finished height.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Choices explained
We compare suitable materials and hardware before the specification is approved.
Scope in writing
The quotation identifies the furniture, fitting and any optional or separate work.
One project contact
Your contact coordinates questions about the proposal and the next steps.
Our process
How we work, step by step
From an initial estimate to checking the installed furniture with you. We confirm the final price after measuring and agreeing the details.
Indicative price
Send us photos, approximate dimensions, the address and what you need. We review the scope and give you an indicative price, subject to measurement.
Measurement
We arrange a visit to check the space, walls, services and access, and take the measurements needed for the design.
Design and project, if needed
If the job calls for it, we prepare the design and project plans after measuring. This work is free when you commission us to manufacture the furniture to those plans.
Final quotation
With the measurements confirmed, we agree the layout, materials, fittings, installation and price in a detailed quotation.
Approval and deposit
You review the proposal. Once you approve it, the agreed deposit starts the order.
Manufacture
We make the furniture to the approved design and prepare the pieces for delivery and fitting.
Installation
We bring the furniture to your property, fit it and adjust doors, fronts and finishing details.
Final check together
We check the furniture with you: openings, finishes and how everything works. We note any remaining adjustments.
Your project starts here
Furniture that fits the way you live.
I'm Francisco Calvo. Before discussing a design, I'd like to understand how you use the room. That gives us a starting point for a practical solution and a sensible conversation about your budget.
No obligation. Rough measurements are enough to get started.
Solutions for your space
What the design needs to resolve
Flooring should be chosen for its subfloor, use and doorway junctions as well as its colour.
Subfloor and installation conditions
Substrate, moisture, level and fitting method are checked for the chosen flooring. Skirting and door clearances are coordinated with the finished height.
Base before boards
We check substrate, moisture and levels before choosing the installation method.
Laying direction
Board direction and format are considered with doors, light and room proportions.
Thresholds and skirting
Junctions with other floors and clearance under doors are planned from the outset.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of parquet and timber flooring
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Natural oak flooring in a living roomProportioned boards and a matte finish give continuity to a bright everyday home
Herringbone parquet in a classic apartmentThe setting-out respects axes, doors and perimeter within a renovated traditional apartment
Chevron parquet flooringThe geometric pattern is centred on the room and suits a high-end contemporary renovation
Wide-plank timber flooringLong wide boards reduce visual joints and reinforce the scale of an open living room
Laminate flooring for a controlled budgetA durable easy-care finish updates an apartment without unnecessarily increasing investment
Engineered timber beside an open kitchenA stable engineered solution connects kitchen and living space with carefully resolved joints and transitions
Parquet repaired to match existing flooringTone, format and direction are matched to integrate a repaired area after layout changes
Timber flooring continued onto stairsTreads, risers and floor junctions maintain grain, safety and proportion
Flooring compatible with underfloor heatingStable boards and a suitable finish create a uniform surface in a home with underfloor heating
Transition between timber and ceramic flooringA flush well-aligned junction separates kitchen and living room without bulky profiles
Diagonal timber flooring in a narrow apartmentThe direction follows the daylight and changes the perception of a long narrow space
Parquet with a border in a historic homeA perimeter border frames the rooms and respects doors, fireplace and classical proportions
Dark walnut flooringA deep tone and satin finish give character to a restrained living room
Whitewashed timber flooring for a coastal homeA pale tone lowers contrast and complements the intense light of a home by the sea
Durable timber flooring for a commercial interiorBoard format, protection and joints are chosen for frequent footfall and straightforward maintenance
Premium selected-oak parquetBalanced grain, precise setting-out and a natural finish create a continuous high-end floor
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Check the base for level and condition before specifying installation.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare plank format, laying direction and skirting in the actual room.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Moisture or level differences require work first and may change the scope.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
We need to see the supporting surface and its junctions before designing a door, wall finish or continuous surface.
The space
Show the whole element and the edges where it meets walls, floor, ceiling or other pieces.
Your priorities
Say what will change and what must remain accessible or aligned.
Your references
Share material references and explain whether grain, colour or the type of joint matters most.
Timing and access
Clarify whether the base is finished or building work will take place before measuring and fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
Photos of the base and its junctions reveal levels or services that must be checked before final pricing.
02Detailed quotation
The proposal sets out material, dimensions, joints, trims and fitting method after the base is inspected.
Share approximate area and photos of the current floor, thresholds and doors.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
The finished appearance depends on the base, joints and trims as much as on the chosen finish.
Durability, care and fitting method depend on the chosen material and existing base.
Before deciding
Questions before you enquire
Is it suitable for underfloor heating?＋
This depends on the product and system. Compatibility and manufacturer instructions are checked before the specification is confirmed.
What do I need for an initial enquiry?＋
Photograph where the piece meets floor, wall and ceiling. A front-on image often hides those details.
What is confirmed before manufacture?＋
We confirm the base, measurements, material, joints and fitting method before parts are made or prepared.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Parquet and timber flooring in Málaga: planning your project
Flooring starts with checking the substrate, including level and moisture conditions.
The chosen product's requirements guide preparation, joints and installation.
Door clearances, skirting and transitions to other floors form part of the scope.
Send the approximate area and existing-floor photos, noting furniture and renovation work that may affect installation.