Designed for the space
Dimensions and layout are checked against the room and your priorities.
MMV Studio
Bespoke interior joinery in Málaga
We can assist you inEspañolEnglishDeutschРусский
Design, manufacture and installation of custom furniture
Bespoke interior joinery in Málaga. Doors, panelling, furniture and finishing pieces are coordinated with walls, floors and services. Each item is identified so junctions are resolved.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Choices explained
We compare suitable materials and hardware before the specification is approved.
Scope in writing
The quotation identifies the furniture, fitting and any optional or separate work.
One project contact
Your contact coordinates questions about the proposal and the next steps.
Our process
How we work, step by step
From an initial estimate to checking the installed furniture with you. We confirm the final price after measuring and agreeing the details.
Indicative price
Send us photos, approximate dimensions, the address and what you need. We review the scope and give you an indicative price, subject to measurement.
Measurement
We arrange a visit to check the space, walls, services and access, and take the measurements needed for the design.
Design and project, if needed
If the job calls for it, we prepare the design and project plans after measuring. This work is free when you commission us to manufacture the furniture to those plans.
Final quotation
With the measurements confirmed, we agree the layout, materials, fittings, installation and price in a detailed quotation.
Approval and deposit
You review the proposal. Once you approve it, the agreed deposit starts the order.
Manufacture
We make the furniture to the approved design and prepare the pieces for delivery and fitting.
Installation
We bring the furniture to your property, fit it and adjust doors, fronts and finishing details.
Final check together
We check the furniture with you: openings, finishes and how everything works. We note any remaining adjustments.
Your project starts here
Furniture that fits the way you live.
I'm Francisco Calvo. Before discussing a design, I'd like to understand how you use the room. That gives us a starting point for a practical solution and a sensible conversation about your budget.
No obligation. Rough measurements are enough to get started.
Solutions for your space
What the design needs to resolve
Interior joinery may bring doors, panelling and furniture together, but each piece has its own demands.
Joinery and architecture
Doors, panelling, furniture and finishing pieces are coordinated with walls, floors and services. Each item is identified so junctions are resolved.
Each piece and its base
A door, panel and unit need different measurements and anchors even when finishes match.
Visible junctions
We set out how leaves, skirting and wall finishes meet before cutting begins.
Fitting order
Installation is coordinated with floors, paint and work that affects final dimensions.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of bespoke interior joinery
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Oak living-room joineryStorage, shelving and the television recess form one made-to-measure composition
Walnut-clad island and tall unitsSlatted fronts, panelling and doors are coordinated with the worktop and architecture
Home office integrated into a storage wallLacquered drawers, shelves and overhead cabinets organise the workspace without loose furniture
Oak wardrobe and deskThe joinery connects wardrobe storage, side shelving and a desk within the bedroom
Oak staircase with under-stair storageTreads, vertical balustrade and triangular storage fronts are resolved as one system
Walnut panelling with a concealed doorThe flush door and low cabinet preserve continuous grain and shadow lines
Oak pocket sliding doorThe door disappears into the clad wall and frees the opening to the office
Bookcase built around an archwayAdjustable shelves, lower cupboards and a ladder use the full height without obscuring the original opening
Slatted divider with a pivoting panelThe piece filters light between living and dining areas and includes low storage
Timber doors for a traditional homeMoulded leaves, oak architraves and brass hardware update the corridor while respecting its character
Curved walnut bar cabinetTambour doors, illuminated shelves and a stone counter follow the rounded wall
Floating oak bathroom vanityDrawers, mirror cabinet and niche are made as a set for everyday use
Folding timber and glass partitionFour glazed leaves separate the study without blocking light from the living room
Curved staircase with an oak handrailTreads, balusters and a continuous handrail demonstrate precise cabinetmaking
Restored window with shutters and benchThe joinery restores the original opening and adds low drawers without altering the façade
Dining bench with panelling and ventilationSeating, drawers and a radiator grille form one continuous piece for a compact dining area
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Begin with the dimensions, supporting surface and purpose of each element.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Coordinate junctions and finishes where several pieces are visible together.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Uneven walls, hidden services and level changes need fitting details before workshop work.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
We need to see the supporting surface and its junctions before designing a door, wall finish or continuous surface.
The space
Show the whole element and the edges where it meets walls, floor, ceiling or other pieces.
Your priorities
Say what will change and what must remain accessible or aligned.
Your references
Share material references and explain whether grain, colour or the type of joint matters most.
Timing and access
Clarify whether the base is finished or building work will take place before measuring and fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
Photos of the base and its junctions reveal levels or services that must be checked before final pricing.
02Detailed quotation
The proposal sets out material, dimensions, joints, trims and fitting method after the base is inspected.
Send wide views and details of what will stay, plus a plan if you have one.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
The finished appearance depends on the base, joints and trims as much as on the chosen finish.
Compare timber, boards, veneers and lacquer by exposure, care and visible edges.
Before deciding
Questions before you enquire
Can you work from construction drawings?＋
Yes, after reviewing dimensions, materials and responsibilities with the relevant professional. Production drawings are confirmed before manufacture.
What do I need for an initial enquiry?＋
Photograph where the piece meets floor, wall and ceiling. A front-on image often hides those details.
What is confirmed before manufacture?＋
We confirm the base, measurements, material, joints and fitting method before parts are made or prepared.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Bespoke interior joinery in Málaga: planning your project
A joinery project can include furniture, doors and wall finishes. We separate these from building and installation work requiring coordination.
Skirting, existing frames and uneven walls need planned junction details before materials are cut.
Timber or board, finish and joints are selected for each component and its intended use.
Send a list of the work with photographs. An itemised scope helps you decide what to complete together or in phases.