Designed for the space
Dimensions and layout are checked against the room and your priorities.
MMV Studio
Furniture for awkward spaces in Málaga
We can assist you inEspañolEnglishDeutschРусский
Design, manufacture and installation of custom furniture
Furniture for awkward spaces in Málaga. Columns, recesses, skirting and out-of-square walls affect units and finishing pieces. Opening movement matters as well as the width of the gap.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Choices explained
We compare suitable materials and hardware before the specification is approved.
Scope in writing
The quotation identifies the furniture, fitting and any optional or separate work.
One project contact
Your contact coordinates questions about the proposal and the next steps.
Our process
How we work, step by step
From an initial estimate to checking the installed furniture with you. We confirm the final price after measuring and agreeing the details.
Indicative price
Send us photos, approximate dimensions, the address and what you need. We review the scope and give you an indicative price, subject to measurement.
Measurement
We arrange a visit to check the space, walls, services and access, and take the measurements needed for the design.
Design and project, if needed
If the job calls for it, we prepare the design and project plans after measuring. This work is free when you commission us to manufacture the furniture to those plans.
Final quotation
With the measurements confirmed, we agree the layout, materials, fittings, installation and price in a detailed quotation.
Approval and deposit
You review the proposal. Once you approve it, the agreed deposit starts the order.
Manufacture
We make the furniture to the approved design and prepare the pieces for delivery and fitting.
Installation
We bring the furniture to your property, fit it and adjust doors, fronts and finishing details.
Final check together
We check the furniture with you: openings, finishes and how everything works. We note any remaining adjustments.
Your project starts here
Furniture that fits the way you live.
I'm Francisco Calvo. Before discussing a design, I'd like to understand how you use the room. That gives us a starting point for a practical solution and a sensible conversation about your budget.
No obligation. Rough measurements are enough to get started.
Solutions for your space
What the design needs to resolve
An irregular recess works best when measured in several places and planned around reachable storage.
Measure the whole geometry
Columns, recesses, skirting and out-of-square walls affect units and finishing pieces. Opening movement matters as well as the width of the gap.
Material and detail agree
The chosen board, veneer, timber or coating determines edge profiles, joints and suitable spans.
Transportable module sizes
The measured design resolves transportable module sizes; it is not added later as a generic extra.
Movement is allowed for
Timber, floors and large panels need tolerances that respect changes in humidity and temperature.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of furniture for awkward spaces
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Cabinet fitted between two columnsThe front remains aligned while the interior adapts different depths around the structure
Storage beneath a sloping roofDoors and drawers follow the pitch while keeping the roof window and beam junctions clear
Furniture beneath a low windowLow drawers use the sill area without reducing daylight or window operation
Cabinetry around pipes and service accessValves, meters and pipework remain accessible for maintenance behind ordered fronts
Furniture fitted to a curved wallRadial modules and segmented fronts follow the geometry without leaving dead gaps
Shallow hallway storageTilt-out shoe storage and sliding fronts add capacity while preserving passage width
Bookcase in an acute cornerShaped shelves and triangular drawers turn a difficult angle into useful space
Furniture on a stair landingA bench, drawers and tall cupboard use the landing without interfering with the balustrade
Storage above a doorwayUpper modules connect two cupboards and use the height while keeping the opening clear
Desk fitted beneath a structural beamThe worktop changes height and the cupboards absorb the beam without losing ergonomics
Cabinet fitted around a chimney breastTwo depths balance the wall while preserving service access and ventilation
Bench with an integrated radiator coverGrilles, seating and side drawers turn an existing installation into a functional area
Drawers beneath very low eavesPull-out modules make the depth usable without requiring access to an uncomfortable low area
Furniture for a split-level living roomThe composition follows the level change and combines seating, storage and guarding
Pantry in an irregular kitchen recessPull-out shelves and bespoke fronts absorb out-of-square walls and a side column
Sculptural composition for a complex recessWalnut, curves and illuminated displays turn several irregularities into a premium architectural feature
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Decide what the space must do before tracing every bend in the wall.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Adapt doors, drawers and shelves to the shape without losing opening clearance.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Columns, level changes and uneven walls may need templates or fitting tolerances.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
The piece needs to solve a clear task and leave room to use, open or maintain it.
The space
Photograph the full opening and nearby obstacles, including sockets, doors and radiators.
Your priorities
Describe what you will do there and which objects or equipment must actually fit.
Your references
A reference helps when you name the part you want: depth, shape, opening or finish.
Timing and access
Provide the address and access details, plus any prior work that will change floors, walls or services.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We look at how you use the opening and how much room each movement needs, then identify any missing photo or dimension.
02Detailed quotation
The final price describes the structure, any mechanism, finish, fixings and fitting scope.
Send overall and corner photos, with width, height and depth at several points.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
For everyday furniture, the supporting structure and hardware matter as much as the visible surface.
Specify cuts, edges and fixings from the real wall rather than one measurement.
Before deciding
Questions before you enquire
Are width and height enough?＋
They help initially, but photographs and available depth are also needed. Changes in dimensions and services are checked before manufacture.
What do I need for an initial enquiry?＋
Show the opening and what happens around it in use. An open door or occupied chair can change the design.
What is confirmed before manufacture?＋
Use, dimensions, supporting surface, mechanisms and fitting access are set before the final price is approved.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Furniture for awkward spaces in Málaga: planning your project
An irregular opening, such as the space beneath stairs, needs checks of depth changes, diagonals and obstructions as well as width and height.
We plan modules and adjustment pieces so the finished furniture can be fitted and used.
Service panels remain accessible through openings included in the design.
Send photographs from several angles and describe the intended use so we can identify the checks needed.