Confirmed models
Installation instructions are checked, including manufacturer clearances and door openings.
MMV Studio
Laundry appliance cupboards in Málaga
We can assist you inEspañolEnglishDeutschРусский
Design, manufacture and installation of custom furniture
Laundry appliance cupboards in Málaga, with room for connections, ventilation and maintenance. Dimensions are based on the actual washer and dryer models.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Service access
Water, drainage, sockets and filters need to remain reachable for maintenance.
Scope in writing
The quotation identifies the furniture, fitting and any optional or separate work.
One project contact
Your contact coordinates questions about the proposal and the next steps.
Our process
How we work, step by step
From an initial estimate to checking the installed furniture with you. We confirm the final price after measuring and agreeing the details.
Indicative price
Send us photos, approximate dimensions, the address and what you need. We review the scope and give you an indicative price, subject to measurement.
Measurement
We arrange a visit to check the space, walls, services and access, and take the measurements needed for the design.
Design and project, if needed
If the job calls for it, we prepare the design and project plans after measuring. This work is free when you commission us to manufacture the furniture to those plans.
Final quotation
With the measurements confirmed, we agree the layout, materials, fittings, installation and price in a detailed quotation.
Approval and deposit
You review the proposal. Once you approve it, the agreed deposit starts the order.
Manufacture
We make the furniture to the approved design and prepare the pieces for delivery and fitting.
Installation
We bring the furniture to your property, fit it and adjust doors, fronts and finishing details.
Final check together
We check the furniture with you: openings, finishes and how everything works. We note any remaining adjustments.
Your project starts here
Furniture that fits the way you live.
I'm Francisco Calvo. Before discussing a design, I'd like to understand how you use the room. That gives us a starting point for a practical solution and a sensible conversation about your budget.
No obligation. Rough measurements are enough to get started.
Solutions for your space
What the design needs to resolve
A utility cabinet must allow doors to open, laundry to move and water and drainage points to remain reachable.
Appliances first
Manufacturer models determine airflow, service access and opening clearances. We design the surrounding cabinet after checking those requirements.
Service access
Water, drainage, sockets and filters need to remain reachable for maintenance.
Stacked appliances
A dryer is only placed above a washer where the appliances and stacking system allow it.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of laundry appliance cupboards
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Stacked appliances beside the balconyTall doors, support shelves and a separate module for laundry products
Laundry fitted beneath a sloping roofA side-by-side washer and dryer beneath a worktop with storage following the roof pitch
Laundry wall beside the kitchenA complete cabinet with a sink, hanging rail and ventilated space for the appliances
Ventilated doors in the bathroomStacked appliances and linen shelves concealed behind moisture-resistant fronts
Compact laundry column in a hallwayA pull-out shelf separates the appliances and helps with folding small items
Green utility cabinetry beside the kitchenSide-by-side appliances, an oak worktop and a pull-out hamper within an integrated wall
Blue cabinet with louvred doorsFront ventilation and side shelves create a practical laundry cupboard inside the bathroom
Premium walnut laundry wallSlatted fronts, a sink and task lighting form an elegant, practical composition
Perforated cabinet on an enclosed balconyStacked appliances share the recess with cleaning tools and overhead storage
Raised appliances with low basketsRaised loading height, lower drawers and a hanging rail reduce strain in daily use
Laundry integrated into the entrance hallAn oak column separates the ventilated appliances from dedicated shoe storage
Rustic-style utility cabinetryLight framed fronts, reclaimed timber and baskets organise a traditional utility room
Kitchen cabinet with a pull-out folding shelfOak doors conceal the appliances, supplies and a practical folding surface
Weather-protected laundry on a terraceNavy fronts and side ventilation adapt the cabinet to a covered outdoor area
Accessible loading and tall storageRaised appliances, pull-out hampers and a sink support a more comfortable routine
Laundry concealed in the dining areaFloor-to-ceiling fluted doors conceal a ventilated laundry column when it is not in use
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Keep taps, drain and sockets accessible without dismantling the whole unit.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Arrange detergents and laundry storage around the appliance doors.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Stacked machines or a tight recess require a check of manufacturer clearances and load limits.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
Services, clearance for appliances and drawers, and daily exposure to water or steam all matter here.
The space
Show the unit and the taps, drains, pipes or appliances that will remain.
Your priorities
Explain whether you need space for towels, cleaning products or laundry and how often you use it.
Your references
A front reference helps, but connections and usable space determine the interior.
Timing and access
State the floor, access route and whether plumbing or other work will finish before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We compare dimensions with appliances, pipes and opening clearance, clarifying access needs before pricing.
02Detailed quotation
With services checked, the price sets out units, materials, hardware, cut-outs and fitting.
Send appliance models or dimensions and photos of the connections and space in front.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
The finish must be easy to clean, but edges and access panels matter as much as the visible surface.
Choose boards, edges and hardware with moisture, cleaning and heat in mind; ventilation cannot be omitted.
Before deciding
Questions before you enquire
Can both machines sit behind doors?＋
Only when the installation follows the ventilation and access instructions for the exact models. Send their references before the design is closed.
Your project starts here
Send the details you have
Send the washer and dryer models, connection photographs and opening dimensions. We will review the details and explain the next step.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Laundry appliance cupboards in Málaga: planning your project
Cabinet dimensions follow the installation requirements of the actual washing machine and dryer models.
Ventilation, valves, filters and service connections must remain accessible behind the furniture.
Stacked appliances need an arrangement approved for those machines. We check this before designing the enclosure.
Send photos of water, drainage and electrical connections, and tell us what additional laundry storage you need.